Resonance UAV Gas Monitoring System Remote Sensors
Being a highly portable system, the Resonance Gas Camera is designed to be small enough to be carried by an Unmanned Aerial
Vehicle (UAV). This unique advantage not only allows for fast, real-time concentrations to be acquired but also the ability to obtain such
information be acquired, but also the ability to obtain such information from an aerial perspective.
The Resonance UAV gas monitoring system allows for a complete 360 degree profile of the plume to be obtained. It’s auto-pilot feature
allows you to map out the flight path before take-off for optimal data acquisition and the on-board camera puts you right in the cockpit for
a better view and lets you determine if a switch to manual control is needed.
This is an exceptional tool for monitoring and profiling of a plume and with it’s birds-eye-view, will provide information that has previously
been extremely hard and costly to obtain.
Copyright Resonance Ltd., December 2011
143 Ferndale Drive North, Barrie, ON L4N 9V9 Tel: 705-733-3633 Fax: 705-733-1388 Email:sales@resonance.on.ca
More Information:
Remote Gas Sensing of SO2 on a 2D CCD (Gas Camera)
Development of Remote Gas Sensing SO2 Camera and UAV
,5km
1500 - 3000m
40+ minutes
>40km/h
CO, CO2, SO2, NO2
Li-ion battery
0.03 - 10 seconds
3.3kg
LabVIEW based software
Range
Flying Altitude
Flight Duration
Max. Air Speed
Detectable Species
Power
Integration Time
Flying Mass
Software
